HM-354 32tsf CONBEL™ System has a load capacity to 32tsf (3,064.3kPa), requires a minimum of 123psi (8.5bar) of compressed air and operates at 110V / 60Hz. The HM354F unit operates at 220V / 50Hz.
The consolidation systems are available in three different load capacities, all rapidly apply and maintain precision loads pneumatically and have a small footprint to save valuable bench space. The controller allows application of low or high loads.
These devices display applied loads through digital displays and use precision pressure regulators and pressure transducers with a linearity of ±0.1%. The 1in (25.4mm) thick aluminum platforms have adjustable centering pads and accept any consolidation ring up to 7.25in (184mm) diameter. Stainless steel vertical rods support the cross-head and dial gauge. One HMA-81 Loading Ball is included with each Load Frame; replacement loading balls are ordered separately. 15 feet of air supply tubing to hook up the compressed air line is also included. Sturdy, enamel-coated steel cabinets protect the unit.
Watch the video below for more information.